Mastercool 69788 Tutorial Video

June 12th, 2014

Looking to make the right decision when purchasing Automotive Air Conditioning Reclaimers? I hope this video for the Mastercool 69788 helps out and also see Robinair 34788 and 34988 Robinair Comparison Videos

MasterCool 69788aMST-69788A Mastercool Recovery Recycle Recharge AC Air Conditioning Machine

See Also Robinair Comparison Videos

U Scan CP9599 Code Scanner for your Smartphone Video Tutorial

June 11th, 2014

KAL-CP9599 Actron U Scan CP9599 Diagnostic for your Smartphone

The New Actron U Scan CP9599 Diagnostic

Scanner for your Smartphone!

How to Bleed Your Brakes Using A Mityvac MV8500 Brake Bleeder and Without

June 11th, 2014

   MTY-MV8500 Mityvac MV8500 Silverline Elite Automotive Test Kit Brake Bleeder

How to bleed your brakes one man operation with a Brake Bleeder Vacuum Pump or Without a Vacuum Pump needing a  two man operation 

When it comes to your vehicle one of the most crucial system is your braking system.  After years of driving your brakes can become weak or spongy, and not be as responsive as they should be.  To solve this problem all it takes is a little money, some time, some skill, and some patience.  I am not going to say that ever person can do this project, but I would say for someone who has had some technical experience with vehicles this task can be accomplished.  Just remember when starting this project to allow for lots of extra time, because it is better to do something slow and take your time, rather than have problems because you hurried through it. I will start by explaining the principle behind brake bleeding.  Your brake system is a basic hydraulic system.  This means that it is operated by pressurized fluid; however, after time this fluid can break down or get air in the system which leads to a decrease in braking performance.  This air can come from a old brake fluid which has boiled and caused air to get into the system.  To correct this problem the vehicles brake system needs to be bled of all and any air which may have leaked into the system over the years.

Read the rest of this entry »

Electronic Specialties Relay Buddy 190 Tutorial

June 11th, 2014

ESI-191 ESI Relay Buddy 191 Pro Test Kit                          ESI-190 ESI 190 Relay Buddy

Pro Kit ES 191                              Relay Kit ES 190

 

 A Quick Video from Steve at Elecronic Specialties

 

Autel Maxisys and Maxisys Mini Introduction by Motor Age

May 21st, 2014

 ATL-MS905 Autel MaxiSys Mini OBDII Scan ToolATL-MS908 Autel MaxiSys OBDII Scan Tool

 Introducing the Autel MS905 Minisys and the Autel MS908 Maxisys

 

Instructional Video for Broken Plug Remover Ford Triton 3 Valve Lisle Tools

May 20th, 2014

Lisle tools 65600 removes broken spark plugs from 2004 and newer Triton 3 valve per cylinder engines.

View Picture The set includes a unique porcelain pusher tool and a tapered left-hand thread remover for removing the broken spark plug without leaving the porcelain in the engine cylinder. Porcelain pusher is used to press the porcelain piece, without breaking the porcelain, farther into the plug tip. This provides space for the left hand thread remover to bite into the stainless steel plug tip so it can then be pulled.Blow-molded storage case included.

New Product Wilton ATV Vise Hitch

May 19th, 2014

The new Wilton 10010  Now available from ToolDesk

WLT-10010 Wilton Portable ATV Hitch Vise 10010

Robinair A/C Service Centers 34788 Vs. 34988

April 15th, 2014

Robinair 34788 vs. Robinair 34988
    

When it comes to air conditioning service machines Robinair is at the top for these machines.  When it comes down to choosing which machine is right for your application you will have several different factors to include.  Some of these factors include options, cost, and dependability.

Every Robinair A/C service machine is made to the highest quality.  They include a vast array of options and are relatively cheap for the options included on them.

This article will help discuss the differences between the Robinair 34788 and the Robinair 34988 .  It will discuss some of the features that each machine has and hopefully help you to decide which machine will work best for your situation.

Read the rest of this entry »

Riveted or Pressed Fit Ball Joint Removal.

March 25th, 2014

sBall joints are a common cause of problems in the suspension and steering systems of new vehicles.  They can be easy to replace if they need to be or else they can be difficult to replace if they are riveted or pressed into place.  If you have ones that are simply bolted in place or threaded in take a look at this Ball Joint Replacement and Inspection.  That article will tell you how to properly diagnose and replace bolted on or threaded in ball joints.

                                         OTC-6530  Ball Joint Master Kit

Read the rest of this entry »

Summer Vehicle Prep How do I prepare my car for summer?

March 22nd, 2014

afSummer Vehicle Prep

When it comes to different seasons, there are different things that you should do to your vehicle to help keep it running in perfect condition.  With summer here it is time to start thinking about preparing your vehicle for the summer.

There are several things that you should do when you are thinking about preparing your vehicle for the summer.  They are all important and should all be done to help keeping your vehicle in top shape.

 

Read the rest of this entry »