Automotive Tools
Facebook

CTA Tools 2880 - Ford / Mazda Camshaft Timing Kit - 1.4L, 1.5L, 1.6L & 2.0L

  • Part Number: CTA-2880
  • For locking and positioning camshafts, crankshafts & injection pump sprockets when replacing timing belts or chains.
  • •For locking and positioning camshafts, crankshafts & injection pump sprockets when replacing timing belts or chains
    •Includes setting gauge and 3 different locking pins
    •Services Mazda and Ford including all HWDA, HWDB, & HXDA engines
    ]
    INSTRUCTIONS:

    NOTE - Alignment must be done prior to timing belt removal

    1.Camshaft setting / Locking Plate is used to accurately align a datum slot, located in the end of the camshaft. The various slots cut into the edge of the plate permit clearance around adjacent parts.
    2.Follow the service manual instructions to remove the camshaft cover and timing belt cover.
    3.Turn the engine in the normal direction of rotation until the camshaft setting/locking plate can be inserted into the machined slot in the end of the camshaft.
    4.Crankshaft Location Pin is designed to screw into the cylinder block and provide a stop for the crankshaft to be positioned against to set the position.
    5.Turn the engine in the normal direction of rotation until the timing mark on the injection pump sprocket lines up with the cast lug on the timing cover.
    6.Remove the plug from the cylinder block access hole and screw in the location pin.
    7.Slowly turn the crankshaft clockwise until the web makes contact with the end of the pin. Number 1 cylinder is now set at on ignition stroke.
  • Price:  $27.88
  • Weight:  1.00


Qty:  

CEN-3D103 Central Tools 3D103 Rotor Run Out Gauge CEN-3D103 Central Tools 3D103 Rotor Run Out Gauge
Use to check gear back lash, valve guide wear, camshaft wear, ball joint wear and brake rotor run-out
Price: $86.67
CEN-6450 Central Tools  Disc Rotor/Ball Joint Gage/Guage Set CEN-6450 Central Tools Disc Rotor/Ball Joint Gage/Guage Set
Price: $189.98
CTA-7639 CTA Tools 7639 - Ford Valve Spring Compressor CTA-7639 CTA Tools 7639 - Ford Valve Spring Compressor
4.6L, 5.4L & 6.8L 3V
Price: $42.87
CTA-7640 CTA Tools 7640 - Ford Camshaft Locking Set - 4.6L, 5.4L & 6.8L 3V CTA-7640 CTA Tools 7640 - Ford Camshaft Locking Set - 4.6L, 5.4L & 6.8L 3V
One tool locks camshaft and the other locks the timing chain. Click for Application chart
Price: $42.76
CTA-7641 CTA Tools 7641 - Ford Camshaft Timing Tool Kit - 3.5L CTA-7641 CTA Tools 7641 - Ford Camshaft Timing Tool Kit - 3.5L
Click for Application chart
Price: $13.95
KAS-8586 Kastar 8586 Ratcheting Serpentine Belt Wrench KAS-8586 Kastar 8586 Ratcheting Serpentine Belt Wrench
15mm, 16mm, and 3/8" Square
Price: $26.88
LIS-18000 Lisle 18000 Universal Camshaft Bearing Tool by Lisle LIS-18000 Lisle 18000 Universal Camshaft Bearing Tool by Lisle
Price: $147.67
LIS-36880 Dual Overhead Camshaft (DOHC) Lock Tool by Lisle LIS-36880 Dual Overhead Camshaft (DOHC) Lock Tool by Lisle
Price: $26.87
LIS-37200 Lisle 37200 Timing Tool for Ford with Tensioner LIS-37200 Lisle 37200 Timing Tool for Ford with Tensioner
For Use When Servicing the Timing Chain on Ford 3.5L - 2007 to 2016, non-turbo 2017. 3.7L - 2009 and newer
Price: $42.88
LIS-37410 Lisle Ford Camshaft Alignment Kit LIS-37410 Lisle Ford Camshaft Alignment Kit
For Servicing the Timing Belt, Chains, Head Gaskets or Other Valve Train Repairs on Ford, Mercury and Mazda Vehicles.
Price: $29.87
LIS-58430 Shaft Type Puller by Lisle Removes Cam and Crank Shaft Seals LIS-58430 Shaft Type Puller by Lisle Removes Cam and Crank Shaft Seals
Price: $13.77
LIS-59800 Lisle 59800 Serpentine Belt Wrench LIS-59800 Lisle 59800 Serpentine Belt Wrench
Price: $49.99
OTC-6469 Ford Camshaft Sensor Synch Tool by OTC OTC-6469 Ford Camshaft Sensor Synch Tool by OTC
Ford Tool Part No.: T96T-12200-A
Price: $33.95
OTC-6487 OTC 6487 Ford Cam Tool Kit OTC-6487 OTC 6487 Ford Cam Tool Kit
Ford cam tool kit for 1992 thru 2012 4.6L, 5.4L V8, and 6.8L V10 engines
Price: $189.00
OTC-6488 OTC 6488 Ford Cam Tool Kit OTC-6488 OTC 6488 Ford Cam Tool Kit
1997 through 2004 4.0L Explorer/Mountaineer SOHC V-6 engines.
Price: $229.67
OTC-6489 Ford Master Cam Tool Set OTC-6489 Ford Master Cam Tool Set
Covers 1992 through 2012 applications
Price: $419.00
OTC-6613 Variable Pin Spanner Wrench OTC tools OTC-6613 Variable Pin Spanner Wrench OTC tools
Price: $64.95
PBT-70896 PBT Cam Clamp PBT-70896 PBT Cam Clamp
Price: $29.88
PBT-70900 Private Brand Tools 70900 Cam Clamp Kit PBT-70900 Private Brand Tools 70900 Cam Clamp Kit
Master set contains the dual CamClamp and CamClamp singles
Price: $56.89
PBT-70960 Private Brand Tools 70960 Crankshaft and Camshaft Seal Tool PBT-70960 Private Brand Tools 70960 Crankshaft and Camshaft Seal Tool
Suits seals from 21.5mm - 64mm
Price: $104.67
Free Shipping on all tools, equipment & supplies
that exceed $250.00 and must be under 50 lbs. (Continental USA Only)

Contact Info

40423 County Hwy. 1
Richville, MN 56576
701-866-4719